Salisbury Fire Department

Photo Gallery


Time for Daylight Saving Time!!
Saturday, March 7, 2020

It’s time to move our clocks forward!!!  Tonight, at 0200 (or before you go to bed), be sure to remember to move all your clocks FORWARD ONE HOUR, in observance of Daylight Saving Time.  With the time change, the Salisbury Fire Department also encourages you to change the batteries in your smoke alarms!!!  While newer model smoke alarms have a ten year battery life cycle, many of us still rely on the “older” style alarms to protect our homes and families.  These models of smoke alarm utilize a 9V battery as a “stand alone”, wall mounted device, or, are electrically powered with the 9V battery as a backup, should there be a power failure.  Either way, having fresh, working 9V batteries in your device is paramount to ensuring the device works as it should when it’s needed most. 
 
The process is simple.  There should either be a flip-up cover, or a cover that removes completely, exposing the inner workings of the alarm.  With the cover up or removed, the 9V battery will be exposed.  Simply remove the battery and replace it with a fresh one, ensuring the battery poles are in the correct position.  Replace the cover and push the test button to ensure the alarm is working.  If the alarm fails to sound, remove the cover and try reversing the battery poles.  Repeat the steps to check that the unit is operating.  If the unit fails to sound again, try a different battery.  Should that step result in failure, obtain and install a new smoke alarm. 
Should you have any issues or questions, contact your local fire department for assistance.  The Salisbury Fire Department will issue and install one (1) smoke alarm, FREE OF CHARGE, to anyone living within its fire district.  We will also be happy to replace your 9V battery for you should you be unable to do so.
 
REMEMBER!!!  WORKING SMOKE ALARMS SAVE LIVES!!!!!
 
Some historical facts relating to Daylight Saving Time:
 
Daylight Saving Time has been used in the U.S. and in many European countries since World War I. At that time, in an effort to conserve fuel needed to produce electric power, Germany and Austria took time by the forelock, and began saving daylight at 11:00 p.m. on April 30, 1916, by advancing the hands of the clock one hour until the following October.
 
Other countries immediately adopted this 1916 action: Belgium, Denmark, France, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, Turkey, and Tasmania. Nova Scotia and Manitoba adopted it as well, with Britain following suit three weeks later, on May 21, 1916. In 1917, Australia and Newfoundland began saving daylight.
 
The plan was not formally adopted in the U.S. until 1918. 'An Act to preserve daylight and provide standard time for the United States' was enacted on March 19, 1918. It both established standard time zones and set summer DST to begin on March 31, 1918. Daylight Saving Time was observed for seven months in 1918 and 1919. After the War ended, the law proved so unpopular (mostly because people rose earlier and went to bed earlier than people do today) that it was repealed in 1919 with a Congressional override of President Wilson's veto. Daylight Saving Time became a local option, and was continued in a few states, such as Massachusetts and Rhode Island, and in some cities, such as New York, Philadelphia, and Chicago.
 
During World War II, President Franklin Roosevelt instituted year-round Daylight Saving Time, called "War Time," from February 9, 1942 to September 30, 1945. From 1945 to 1966, there was no federal law regarding Daylight Saving Time, so states and localities were free to choose whether or not to observe Daylight Saving Time and could choose when it began and ended. This understandably caused confusion, especially for the broadcasting industry, as well as for railways, airlines, and bus companies. Because of the different local customs and laws, radio and TV stations and the transportation companies had to publish new schedules every time a state or town began or ended Daylight Saving Time.
 
On January 4, 1974, President Nixon signed into law the Emergency Daylight Saving Time Energy Conservation Act of 1973. Then, beginning on January 6, 1974, implementing the Daylight Saving Time Energy Act, clocks were set ahead. On October 5, 1974, Congress amended the Act, and Standard Time returned on October 27, 1974. Daylight Saving Time resumed on February 23, 1975 and ended on October 26, 1975.
 
In the early 1960s, observance of Daylight Saving Time was quite inconsistent, with a hodgepodge of time observances, and no agreement about when to change clocks. The Interstate Commerce Commission, the nation's timekeeper, was immobilized, and the matter remained deadlocked. Many business interests were supportive of standardization, although it became a bitter fight between the indoor and outdoor theater industries. The farmers, however, were opposed to such uniformity. State and local governments were a mixed bag, depending on local conditions.
 
Efforts at standardization were encouraged by a transportation industry organization, the Committee for Time Uniformity. They surveyed the entire nation, through questioning telephone operators as to local time observances, and found the situation was quite confusing. Next, the Committee's goal was a strong supportive story on the front page of the New York Times. Having rallied the general public's support, the Time Uniformity Committee's goal was accomplished, but only after discovering and disclosing that on the 35-mile stretch of highway (Route 2) between Moundsville, W.V., and Steubenville, Ohio, every bus driver and his passengers had to endure seven time changes!
 
By 1966, some 100 million Americans were observing Daylight Saving Time based on their local laws and customs. Congress decided to step in and end the confusion, and to establish one pattern across the country. The Uniform Time Act of 1966 (15 U.S. Code Section 260a) signed into Public Law 89-387 on April 12, 1966, by President Lyndon Johnson, created Daylight Saving Time to begin on the last Sunday of April and to end on the last Sunday of October. Any State that wanted to be exempt from Daylight Saving Time could do so by passing a state law.
 
The Uniform Time Act of 1966 established a system of uniform (within each time zone) Daylight Saving Time throughout the U.S. and its possessions, exempting only those states in which the legislatures voted to keep the entire state on standard time.
 
In 1972, Congress revised the law to provide that, if a state was in two or more time zones, the state could exempt the part of the state that was in one time zone while providing that the part of the state in a different time zone would observe Daylight Saving Time. The Federal law was amended in 1986 to begin Daylight Saving Time on the first Sunday in April.
Under legislation enacted in 1986, Daylight Saving Time in the U.S. began at 2:00 a.m. on the first Sunday of April and ended at 2:00 a.m. on the last Sunday of October.
 
The Energy Policy Act of 2005 extended Daylight Saving Time in the U.S. beginning in 2007, though Congress retained the right to revert to the 1986 law should the change prove unpopular or if energy savings are not significant. Going from 2007 forward, Daylight Saving Time in the U.S. begins at 2:00 a.m. on the second Sunday of March and ends at 2:00 a.m. on the first Sunday of November.
 
In most of the countries of Western Europe, including the countries that are members of the EU, Daylight Saving Time:  begins at 1:00 a.m. GMT on the last Sunday of March and ends at 1:00 a.m. GMT on the last Sunday of October.
Observance of Daylight Saving Time elsewhere in the world is highly variable.
 
For further information referencing the history of Daylight Saving Time, please visit http://www.webexhibits.org/daylightsaving/e.html

Views: 1

Views: 1

Views: 1